Send an inquiry
PTFE thread seal tapes are used for sealing pipe thread joints for all types of mediums (pH 0–14) in the temperature range from -80°C to +300°C.
STANDARD SIZES:
- 1" width 25mm, thickness 0.2mm in a 15m roll
- 3/4" width 19mm, thickness 0.2mm in a 15m roll
- 1/2" AT width 12mm, thickness 0.1mm in a 12m roll (AT – A test for gases)
- 1/2" width 12mm, thickness 0.076mm in a 12m roll
TWINEFLON*
Patented sealing cord from 100% PTFE (Teflon) for sealing threads of metal and plastic pipes.
Benefits:
- Harmless material without a limitation of shelf-life
- Resistant to becoming infested with fungal and bacterial growth, enzymes and microorganisms
- Stable, but soft through its entire life span
- No effect on liquids in the pipes
- No need for additional sealing additives
Benefits of use:
- Replaces other seals and sealing tapes
- Easier and faster mounting
- Low costs and maximum durability
- It is simply wrapped around the threads
- Application directly from the reel
- Unused cord stays protected from dirt and dust in the reel
Packaging:
- packed in handy 175m reels with the liquid for application
- in boxes of 25 reels
Attestations:
- DIN-DVGW for gas and water according to EN751-3FRp and DIN 30660 (NV-5143BP0261)
- DIN-DVGW tested and approved for adjustment of pipes of up to 45°
- DVGW tested and approved for pressures of up to 100 bar according to the EN751-3 testing protocol (tested at 23°C)
- TZW tested and approved for hot and cold water according to the recommendations of the German Ministry of Health
- BAM tested and approved for use with liquid oxygen at 30 bar and 100°C (without the liquid for application)
- WRAS – listed in the U.K. Water Regulations Advisory for use with cold and hot water (Ref.0212515)
- ASTM F423 – passed cyclic test: steam – cold water
- On the list of UL sealing materials 19BN (MH26734) under the systems for handling fuels, petroleum, oil, propane, butane, benzene, paraffin and natural gas (up to 300psig).